How many farads are in one microfarad?

One microfarad (1 µF) equals exactly 0.000001 farads (1×10⁻⁶ F). The prefix "micro" means 10⁻⁶, so dividing by 1,000,000 gives the value in farads.

Why do capacitors use microfarads instead of farads?

The farad is a very large unit. Practical capacitors for electronics typically range from a few picofarads (pF) to thousands of microfarads (µF) — far below 1 F. Only supercapacitors and ultracapacitors are commonly rated in farads.

What is the difference between µF and uF?

They represent the same unit. "µF" uses the Greek letter mu (µ) for "micro", while "uF" is the ASCII-safe substitute commonly seen in software, datasheets, and schematics that cannot render the µ character.

Can I enter decimal values like 0.1 µF?

Yes. You can enter any positive number, including decimals such as 0.1 µF (= 0.0000001 F = 100 nF) or 4700 µF (= 0.0047 F). The converter handles them correctly.

How do I convert microfarads to nanofarads?

Multiply the microfarad value by 1,000. For example, 1 µF = 1,000 nF. This result also appears directly in the converter output below the farad value.

Is this converter accurate for engineering use?

Yes. The conversion is a precise mathematical division with no approximation. Results are displayed with up to 6 significant figures to avoid floating-point display noise.

Microfarads to Farads Converter

Enter a capacitance value in microfarads and instantly see the equivalent in farads plus all major capacitance units.

Enter Value in Microfarads (µF)

Capacitance (µF)

Common Values

Conversion Results

Enter a value on the left to see conversions.

Capacitance Unit Reference

Unit	Symbol	Value in Farads	Equivalence
Farad	F	1	Base unit
Millifarad	mF	10⁻³	1,000 mF = 1 F
Microfarad	µF	10⁻⁶	1,000,000 µF = 1 F
Nanofarad	nF	10⁻⁹	1 nF = 0.001 µF
Picofarad	pF	10⁻¹²	1,000,000 pF = 1 µF

Copied!

Summary

This converter instantly translates capacitance values from microfarads (µF) to farads (F) and all major capacitance units, including millifarads (mF), nanofarads (nF), and picofarads (pF). One microfarad equals exactly 0.000001 farads (1×10⁻⁶ F). While the farad is the SI base unit of capacitance, most practical capacitors are rated in microfarads — this conversion is essential when working with datasheets, circuit simulations, or physics equations that require SI base units.

How it works

Enter a capacitance value in the microfarads (µF) input field.
The converter divides by 1,000,000 to produce farads (F).
Results for mF, nF, and pF are computed simultaneously.
Click the copy icon next to any result to copy it to your clipboard.
Use the Clear button to reset and start a new conversion.

Use cases

Converting capacitor datasheet values from µF to farads for physics or SPICE simulations.
Translating component ratings into SI base units for engineering calculations.
Cross-checking capacitance values when comparing specs across different unit scales.
Teaching the relationship between microfarads and the farad base unit.
Computing energy stored in a capacitor (E = ½CV²) when V is in volts and C must be in farads.
Converting filter or oscillator design parameters that mix µF and F notation.

Frequently Asked Questions

Last updated: 2026-07-14 · Reviewed by Nham Vu