How many nanofarads are in one microfarad?

One microfarad (1 µF) equals exactly 1,000 nanofarads (1,000 nF). The prefix "micro" means 10⁻⁶ and "nano" means 10⁻⁹, so the conversion factor is 10³ = 1,000.

How many picofarads are in one microfarad?

One microfarad equals 1,000,000 picofarads (1 × 10⁶ pF). Picofarads are three orders of magnitude smaller than nanofarads.

What is the difference between µF and uF?

They represent the same unit. "µF" uses the Greek letter mu (µ) for "micro", while "uF" is the ASCII-safe substitute commonly used in software and datasheets that cannot render the µ character.

Can I enter decimal values?

Yes. You can enter any positive number, including decimals such as 0.1 µF or 4.7 µF. The converter handles them correctly.

What is a typical capacitor value range?

Ceramic capacitors commonly range from a few picofarads (pF) to tens of microfarads (µF). Electrolytic capacitors are typically from 1 µF up to thousands of µF (mF range).

Is this tool accurate for engineering use?

Yes. The conversion is a precise mathematical multiplication with no approximation. Results are displayed with up to 6 significant figures to avoid floating-point display noise.

Microfarads to Nanofarads Converter

Enter a capacitance value in microfarads and instantly see the equivalent in nanofarads, picofarads, farads, and millifarads.

Enter Value in Microfarads (µF)

Capacitance (µF)

Common Values

Conversion Results

Enter a value on the left to see conversions.

Capacitance Unit Reference

Unit	Symbol	Value in Farads	Equivalence
Farad	F	1	Base unit
Millifarad	mF	10⁻³	1,000 mF = 1 F
Microfarad	µF	10⁻⁶	1 µF = 1,000 nF
Nanofarad	nF	10⁻⁹	1 nF = 1,000 pF
Picofarad	pF	10⁻¹²	1,000,000 pF = 1 µF

Copied!

Summary

Enter a capacitance value in microfarads and instantly see the equivalent in nanofarads, picofarads, farads, and millifarads.

How it works

Enter a capacitance value in the microfarads (µF) input field.
The converter multiplies by 1,000 to produce nanofarads (nF).
Results for pF, mF, and F are computed simultaneously.
Click the copy icon next to any result to copy it to your clipboard.
Use the Clear button to reset and start a new conversion.

Use cases

Reading capacitor markings on PCB schematics that mix µF and nF values.
Cross-checking component datasheets during circuit design.
Converting SPICE simulation parameters between unit scales.
Teaching electronics students the relationship between capacitance units.
Quickly translating filter design formulas from one unit system to another.
Verifying capacitor values when ordering parts with different unit labels.

Frequently Asked Questions

Last updated: 2026-09-19 · Reviewed by Nham Vu