What formula is used to calculate zinc pipe weight?

The formula is: Weight = (π ÷ 4) × (OD² − ID²) × Length × Density. OD is the outer diameter in meters, ID is the inner diameter (OD minus 2× wall thickness) in meters. Multiplying the resulting volume (m³) by the zinc density (kg/m³) gives weight in kilograms.

What is the density of zinc used in the calculation?

Pure zinc has a density of 7133 kg/m³. Common zinc alloys vary: Zamak 2 = 6600 kg/m³, Zamak 3 = 6600 kg/m³, Zamak 5 = 6600 kg/m³, Zamak 7 = 6600 kg/m³. This calculator uses the standard density for each selected grade.

What is the difference between outer diameter and wall thickness?

Outer diameter (OD) is the total outside measurement of the pipe. Wall thickness is how thick the pipe wall is. Inner diameter (ID) is calculated as OD minus 2× wall thickness. The calculator warns you if wall thickness is geometrically impossible for the given OD.

Does this calculator support imperial (inch) inputs?

Yes. You can enter outer diameter and wall thickness in mm, cm, or inches. Length can be entered in meters, mm, feet, or inches. All values are converted to meters internally before calculation.

Can I calculate total weight for multiple pipes at once?

Yes. Enter the number of pipes in the Quantity field and the calculator shows both the per-pipe weight and the total batch weight.

Is pure zinc denser than common zinc alloys like Zamak?

Yes. Pure zinc has a density of approximately 7133 kg/m³, while Zamak alloys (which contain aluminum, magnesium, and copper) are lighter at around 6600 kg/m³. Always verify the grade datasheet for precision work.

Zinc Pipe Weight Calculator

Name: Zinc Pipe Weight Calculator
Availability: InStock
Author: Nham Vu

Enter outer diameter, wall thickness, and length to instantly calculate zinc pipe weight in kg and lb.

Pipe Dimensions

Outer Diameter (OD)

Wall Thickness

Length

Zinc Grade

Quantity (pipes)

Formula Reference

W = (π / 4) × (OD² − ID²) × L × ρ

Where OD = outer diameter (m), ID = inner diameter = OD − 2×t (m), t = wall thickness, L = length (m), ρ = zinc density (kg/m³), W = weight (kg).

Enter pipe dimensions on the left and click Calculate.

Zinc Grade Densities

Grade	Description	kg/m³	lb/in³
Pure Zinc (Z1)	Highest purity / galvanizing	7133	0.2577
Zamak 2	High strength die casting	6600	0.2385
Zamak 3	General purpose die casting	6600	0.2385
Zamak 5	High copper / harder alloy	6600	0.2385
Zamak 7	High purity / thin wall	6600	0.2385

Copied!

Summary

Enter outer diameter, wall thickness, and length to instantly calculate zinc pipe weight in kg and lb.

How it works

Enter the pipe outer diameter (OD) and select the unit (mm, cm, or in).
Enter the wall thickness and select the unit (mm, cm, or in).
Enter the pipe length and select the unit (m, mm, ft, or in).
Choose the zinc grade from the dropdown (pure zinc or a Zamak alloy).
Optionally enter a quantity to calculate total weight for multiple pipes.
Click Calculate — weight is shown in kg and lb with a full dimension breakdown.

Use cases

Estimating zinc pipe weight for structural and architectural projects.
Calculating shipping and freight weight for zinc pipe orders.
Comparing wall thickness options to optimize weight and cost.
Preparing bill of materials (BOM) for galvanizing or plating shops.
Verifying load calculations for supports handling zinc-clad pipework.
Material planning for corrosion-resistant plumbing systems using zinc alloy pipe.
Quick field check of pipe weight before lifting or rigging operations.
Cost estimation for zinc pipe purchases priced by weight.

Frequently Asked Questions

Last updated: 2026-06-11 · Reviewed by Nham Vu